BG Series Scraper Conveyor
Nlebanya ihe nlebanya nke Scraper BG Series
1.BG usoro scraper ebu bụ a na-aga n'ihu na-ebuga n'ibu akụrụngwa maka ibuga powdery na obere granular akọrọ ihe, nke nwere ike hazie horizontally ma ọ bụ chọọ na a obere akụkụ.
2.The akụrụngwa nwere uru nke usoro dị mfe, arụ ọrụ kwụsiri ike na nke a pụrụ ịdabere na ya, ogologo oge na-ebufe ogologo oge, arụmọrụ mkpuchi dị mma, obere uwe na obere mkpọtụ.
3.Its usoro okirikiri nhọrọ ukwuu bụ mgbanwe, na ọ nwere ike tinye na budata ihe na otutu ihe na-aghọta quantitative ibuga.
4.N'ihi na shei ahụ bụ usoro ejikọtara nke ọma, ọ nwere uru dị ịrịba ama n'ịkwalite ọnọdụ ọrụ nke ndị ọrụ na igbochi mmetọ gburugburu ebe obibi mgbe ị na-eme ihe na-egbu egbu, na-efe efe, ihe mgbawa na ihe dị elu.
Atụmatụ arụrụ arụ na ụkpụrụ ọrụ BG Series Scraper
1.BG usoro scraper ebu na-emi esịnede isi akụkụ, n'etiti trough ahu, ọdụ akụkụ, scraper ebu yinye, ụgbọala ngwaọrụ na echichi bolster doo.
2.Fully kpuchie casing, ọ dịghị ihe ntapu mgbe akụrụngwa na-agba ọsọ;A na-eme ka agbụ na-ebuga ya nke elu-edu alloy die forgings mgbe ọgwụgwọ okpomọkụ, nke siri ike na-eguzogide;ntinye na ntinye nke akụrụngwa na ogologo nnyefe nwere ike ịhazi ya n'ụzọ dị mfe ma hazie ya dịka usoro chọrọ.
3.The ihe na-abanye na ala nke tank ọbụna site na nri ọdụ ụgbọ mmiri nke akụrụngwa, na-na-aga n'ihu na ọbụna na-ebufe si n'ọdụ ụgbọ mmiri na-epupụta n'ọdụ ụgbọ mmiri na-ebu-ebu scraper ebu na-agba ọsọ na-aga n'ihu site ọdụ na igwe. isi.Ọ nwere ike na-aghọta multi-point nri na multi-point nbudata.
4.The ọdụ nke igwe na-onwem na ịghasa mgbanwe ngwaọrụ ịgbanwe tightness nke ebu yinye iji hụ na ọ bụ mgbe niile na moderately tensioned ala n'oge ọrụ, nke mere na akụrụngwa na-na a kwụsiri ike na-arụ ọrụ ọnọdụ.
5.BG usoro scraper conveyors kwesịrị ekwesị maka ibuga powdery na obere granular akọrọ ihe na obere abrasiveness na obere mkpokọta kpọmkwem ike ndọda, dị ka steelmaking ájá na ájá si akpa nzacha.
6.The BG usoro scraper conveyor nke ụlọ ọrụ anyị na-emepụta nwere ike ịhọrọ mgbe ị na-ebufe powdery, obere ihe na obere ihe mgbochi akọrọ na akwa abrasiveness na nnukwu njupụta dị elu.
Ngwa
1.BG usoro scraper conveyors kwesịrị ekwesị maka ibuga powdery na obere granular akọrọ ihe na obere abrasiveness na obere mkpokọta kpọmkwem ike ndọda, dị ka ígwè na-eme uzuzu na ájá si akpa filter.
2.BG usoro scraper conveyors na-ugbu a n'ọtụtụ ebe na-eji na ígwè, metallurgy, n'efu incineration ， eletriki ike, chemical ụlọ ọrụ, Ngwuputa, ụlọ ihe na ndị ọzọ ọrụ.Ibufe uzuzu iji bufee sistemu uzuzu.
| Nlereanya | BG250 |
| Ogologo obosara (mm) | 250 |
| Omimi Chute(mm) | 400 |
| Ike (m3/h) | 5m3/h 10m3/h |
| Nha scraper (mm) | L150 * W220 * H40 |
| Mgbapụta agbụ (mm) | (P1/P2) P=142mm/200mm |
| Ọsọ agbụ ígwè (m/s) | 0.065 0.1 |
| Ọkpụrụkpụ ihe ụgbọ njem (mm) | 100 |
| Ogologo ihe ebufe (m) | ≤25 |
| Akụkụ nwụnye (ogo) | ≤15° |
| Ike moto Kw | 4 |
| Ụdị ntinye draịva | Ekwadoro azụ (aka ekpe/aka nri) |
| Ụdị nnyefe | Chain Drive |
| Ezigbo granularity (mm) | <5 |
| Oke iru mmiri (%) | ≤5% |
| Okpomọkụ kacha (˚C) | ≤150˚C |
Nhọrọ atọ ịhọrọ:
| Ike (m3/h) | Ogologo ihe ebufe (m) | Ọsọ agbụ ígwè (m/s) | Ike moto Kw |
| 5 | 4.82 <L ≤25 | 0.065 | 4 |
| 10 | 4.82 <L≤25 | 0.1 | 4 |
| Nlereanya | BG310 |
| Ogologo obosara (mm) | 310 |
| Omimi Chute(mm) | 400 |
| Ike (m3/h) | 10m3/h 15m3/h 15m3/h |
| Ọsọ agbụ ígwè (m/s) | 0,077 0.12 0.12 |
| Nha scraper (mm) | L200* W280 * H46 |
| Mgbapụta agbụ (mm) | (P1/P2) P=142mm/200mm |
| Ogologo ihe ebufe (m) | ≤20 ≤20 ≤35 |
| Ọkpụrụkpụ Ihe Ụgbọ njem (mm) | 115mm |
| Akụkụ nwụnye (ogo) | ≤15° |
| Ike moto Kw | 4 4 5.5 |
| Ụdị ntinye draịva | Ekwadoro azụ (aka ekpe/aka nri) |
| Ụdị nnyefe | Chain Drive |
| Ezigbo granularity (mm) | <8 |
| Oke iru mmiri (%) | ≤5% |
| Okpomọkụ kacha (˚C) | ≤150˚C |
Nhọrọ atọ ịhọrọ:
| Ike (m3/h) | Ogologo ihe ebufe (m) | Ọsọ agbụ ígwè (m/s) | Ike moto Kw |
| 10 | 5.4 | 0,077 | 4 |
| 15 | 5.4 | 0.12 | 4 |
| 15 | 5.4 | 0.12 | 5.5 |
| Nlereanya | BG430 |
| Ogologo obosara (mm) | 430 |
| Omimi Chute(mm) | 500 |
| Ike (m3/h) | 15m3 / h 15m3/h 25m3/h |
| Nha scraper (mm) | L200* W400 * H46 |
| Ọkpụrụkpụ Ihe Ụgbọ njem (mm) | 130 |
| Ọsọ agbụ ígwè (m/s) | 0,077 0,077 0.12 |
| Mgbapụta agbụ (mm) | (P1/P2) P=142mm/200mm |
| Ogologo ihe ebufe (m) | ≤25 ≤40 |
| Akụkụ nwụnye (ogo) | ≤15° |
| Ike moto Kw | 4 5.5 7.5 |
| Ụdị ntinye draịva | Ekwadoro azụ (aka ekpe/aka nri) |
| Ụdị nnyefe | Chain Drive |
| Ezigbo granularity (mm) | <10 |
| Oke iru mmiri (%) | ≤5% |
| Okpomọkụ kacha (˚C) | ≤150˚C |
Nhọrọ atọ ịhọrọ:
| Ike (m3/h) | Ogologo ihe ebufe (m) | Ọsọ agbụ ígwè (m/s) | Ike moto Kw |
| 15 | 6 | 0,077 | 4 |
| 15 | 6 | 0,077 | 5.5 |
| 25 | 6 | 0.12 | 7.5 |
| Nlereanya | BG500 |
| Ogologo obosara (mm) | 500 |
| Omimi Chute(mm) | 500 |
| Ike (m3/h) | 30m3/h |
| Ọsọ agbụ ígwè (m/s) | 0.12 |
| Mgbapụta agbụ (mm) | (P1/P2) P=142mm/200mm |
| Ogologo ihe ebufe (m) | 5.9 |
| Nha scraper (mm) | 200 × 470 × 46mm |
| Ọkpụrụkpụ Ihe Ụgbọ njem (mm) | 150mm |
| Akụkụ nwụnye (ogo) | ≤15° |
| Ike moto Kw | 7.5 |
| Ụdị ntinye draịva | Ekwadoro azụ (aka ekpe/aka nri) |
| Ụdị nnyefe | Chain Drive |
| Ezigbo granularity (mm) | <10 |
| Oke iru mmiri (%) | ≤5% |
| Okpomọkụ kacha (˚C) | ≤150˚C |
Mara: oke n'elu bụ naanị maka ntụnye aka, enwere ike ịhazi ya site na ihe dị iche iche chọrọ.
